41mm Tripod Quick Release Plate for Ambico V0554, Sunpak 7500 Pro

41mm Tripod Quick Release Plate for Ambico V0554, Sunpak 7500 Pro

Add your review
 
$14.95
  • Allows you to quickly and easily attach and detach your camera or device
  • Compatible tripod models listed below
  • Conveniently swap out more than one camera or device with the same tripod
  • For use with certain models of Ambico V-0550 V-0551 V-0552 V-0553 V-0554 Fluid Type Head
  • Only and Sunpak 7500 Pro 7500tm 7575 Kalimar Pro-Tech V-40 Samsonite 1100 2601 Quantaray tripods and others
  • No coin or screwdriver is needed to tighten the screw
  • Tapered square base that fits into the tripod is 41mm X 41mm (1.625" x 1.625")
  • Top dimensions are 41mm x 45mm for the top where the camera attaches
  • Universal 1/4 inch Camera Mounting Screw fits most cameras and camcorders (and cell phone tripod adapters - sold separately)
 
 
Estimated Delivery: July 23, 2024 - July 27, 2024
Free Shipping: On all orders over $35.00

100% NO-RISK MONEY BACK GUARANTEE!

Ships FAST to you from the nearest USA warehouse.

payment options

tripod quick release plate

ambico quick release plate

41mm (1-5/8") Base - Tripod Quick Release Plate Replacement for:

  • Ambico V-0550 V-0551 V-0552 V-0553 V-0554 Fluid Head Tripods ONLY (Has bubble level on tripod head, see pictures for reference) MAY REQUIRE MODIFICATION, SEE NOTES BELOW. PLEASE MEASURE your Ambico tripod head, see pictures for example of correct tripod and the measurements. This is for the FLUID TYPE HEAD ONLY (Does not fit the Non-Fluid Head)
  • AMBICO TRIPODS - PLEASE NOTE: There is about a 5% possibility you will find the plate is BARELY too big and does not fit the Ambico Tripods listed here, but do not worry. By "barely too big" I mean just a "hair" too tight to fit. The problem is due to a "bad" batch of Ambico tripods with a manufacturing specification that was off slightly. The easy fix is to to file off / sand off a tiny bit of the base of the plate (on the 2 straight sides, not the beveled sides), or alternately do this to the tripod opening where the plate goes. By removing just the slightest amount of plastic, it will fit into the tripod head and work great.
  • Kalimar Pro-Tech V-40 Tripod with V40 Photo/Video Fluid Type Head, Pro-Tech V-60 & V-80 Tripod with Fluid Type Head
  • Sakar TR-64 Tripod
  • Samsonite 1100, 2600, 2601, 8801 and 8802 Tripods
  • Solidex Nextech VT200 Compact Tripod
  • Quantaray QSX 9500, QSX 9502, QSX9500, QSX9502 Tripods
  • OLDER Sunpak 5200D & 5200DLX Tripod (1st Generation ONLY - PLEASE MEASURE carefully as there were DIFFERENT models labeled 5200D and 5200DLX and this quick release plate ONLY FITS THE OLDER VERSION) Please be sure your tripod head looks like the photo and measures in the receptacle 41mm / 1.6" wide (Replaces Part Number 620-762 / 620-733)
  • OLDER Sunpak Platinum Plus 5858D Tripods (1st Generation ONLY - PLEASE MEASURE carefully as there were 3 DIFFERENT models labeled 5858D and this quick release plate ONLY FITS THE OLDER VERSION) and (Replaces Part Number 620-733)
  • Sunpak 6000PG Tripod & 620-CPG / 620CPG Head (DOES NOT FIT ULTRA 6000PG GRIP, see pictures for reference)
  • Sunpak 7500 Pro, Platinum Plus 7500PG, Platinum Plus 7500 Pro, Ultra 7500TM, Ultra 7575, Ultra 757, Ultra 757TM, Platinum Plus 757, Ultra 757B, Platinum Plus Ultra 757B, 9500, 9502TM, QSX 9500, QSX 9502 Tripods (Replaces Part Number 620-733 / QRP1) PLEASE MEASURE your Sunpak tripod head, see pictures for example of correct tripod and the measurements.


Dimensions:

Base Size: 41mm x 41mm (1-5/8" square base) - This measurement is IMPORTANT - If your tripod head does not have this measurement, then it is not compatible with your tripod. Also check the list of compatible tripods above.

The top of the QR plate: Outside dimensions are 41mm x 45mm at the widest point for the top where the camera attached to.

Universal 1/4 inch Camera Mounting Screw fits most cameras and camcorders (and cell phone tripod adapters, sold separately)

QR plates attach to the tripod mount on your camera and allow you to quickly and easily attach and detach your camera or device from a compatible tripod head.

Having extra QRP1 quick release qr plate - quick release plates means you can quickly swap cameras or devices with the same tripod head.

Lets you easily remove your camera or device from your tripod.

Includes:
1 x DaVoice Quick Release Plate (QR Plate QRP1 / 620-733)

This is a DaVoice brand QR Plate. Any use of other brand names or models is made solely for purposes of demonstrating compatibility.

Shipping

FREE Shipping on all orders over $35!! We ship your order from the nearest USA warehouse from your location that has this item in stock. (If you are located outside the USA, please contact us for a shipping quote.)

Delivery

Will usually ship within 1 business day - Please allow 1-3 days for your order to arrive. We ship your order from the nearest USA warehouse from your location that has this item in stock. Please note that shipping estimate number of days could be extended by one day due to holidays.

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
P. Weston
Arrived in great shape

Arrived in great shape.

M
Michelle Sloan
Good

good, just what I needed

M
Mac
Just as advertised

Just as advertised.

B
Bruce
Great job guys

Great job guys.

A
Ancorp
Fast and as described

Fast shipping, product was as described!

Recently Viewed